Plumbing repairs have been common since the invention of plumbing. Therefore, it’s not surprising that typical problems will arise in Sarasota, FL. For many of them, you’ll need professional maintenance and repairs. Read on to discover how you can resolve seven common plumbing problems easily with a little knowledge and the right tools.

Dripping Faucet

A leaky faucet is such a common plumbing problem that it has become a cliché for something endlessly annoying. Usually, you can fix it by replacing the rubber bushings that get damaged over time by buildup from tap water contents.

If this doesn’t work, you may need to replace the entire fixture. In some cases, you may want a professional to fix the plumbing, which may also need repairs if the leak damaged the connection.

Slow Drain

Slow drains are most often caused by clogs in the pipe, which you can usually find in areas where there’s some object such as the traditional pull-stopper in a sink. The first step is to move the stopper up and down to release any air that may be trapped and interfering with the flow.

If that doesn’t help, you can access the clog by removing the stopper. You might need a plumber to snake the line, though, if you can’t locate the clog.

Slow Faucet

Is your water coming out slowly from the tap when the handle is wide open? Something is obstructing the flow in the line or fixture. To check the fixture, first unscrew the end of the faucet head to check the screen for debris and corrosion. Then clear it away if you notice a blockage.

If there’s still an issue, turn off the water valves leading to your tap. Remove the fixture via the bolts through the countertop. Then check the hardware for irregularities.

Unstable Toilet or Sink

The first thing to check on a shaky toilet or sink is the hardware that attaches it to the wall and floor. Confirm that it hasn’t simply become loose over time. If it’s secured well, the issue is most likely due to a leak causing damage to the floor underneath.

This will require a repair before replacing the unit. It can be an extensive project that an expert plumber should complete.

Drains Backing Up

When drains back up, there’s usually a clog in the main line. But it could be as serious as a broken sewer line. In any case, this is the kind of job you want to have an experienced plumber handle because it’ll likely be necessary to dig up the line to replace it if it’s broken. The extent of the problem won’t be realized until the line is investigated further with specialized equipment.

Leaking Pipes

This is a problem commonly found in older homes where the plumbing hasn’t been updated and is composed of cast iron, clay or lead. These older materials eventually wear out and become corroded or broken, which causes them to lose integrity and start to leak.

If the problem hasn’t caused damage to your wall and floor construction, you can sometimes tighten leaky pipes successfully. Often, though, they will need replacing with a proper seal.

Dirty Hot Water

If the hot water coming from the tap is dirty, but the cold water is clear, you likely have a problem with your water heater. Over time, the interior construction of a water heater breaks down with rust, corrosion, and buildup from things like hard water and begins to allow them to come through the tap.

The simplest solution to this is to buy a new water heater to maintain the health of your family. On the other hand, it may be possible to flush your water heater out and drain the tank by removing the plug at the bottom.

You can resolve some plumbing problems rather simply by just about anyone with some savvy. But many problems you might encounter need the attention of a trained expert. To learn more about the products and services we provide for plumbing repairs in Sarasota, FL, contact Custom Air & Plumbing today.

Image provided by iStock

Font Resize
Contrast

Pin It on Pinterest